|
Floyd
Rose Tremolo Systems
This innovative unit works by locking the strings
down at the nut and bridge. Friction is virtually eliminated allowing
you to perform amazing tremolo acrobatics. Fine tuning thumbscrews
are located on the bridge to adjust your tuning after the string
nut is locked down. Note: Alterations to your instrument may be
required. Locking nut sold separately due to the large variety of
nut widths.
|
 |
|
 |
Floyd
Rose Pro
The Floyd Rose Pro is a low-profile, smaller version of the Original
Floyd Rose bridge, and takes up less surface area than the Floyd Rose
II or Original. The fine tuners are slightly angled for playing comfort. |
Floyd
Rose II
The Floyd Rose II's steel saddles are mounted on a compressed metal
base plate, which provides great tone at an economical price. Similar
to the Floyd Rose Original in size and appearance. |
Floyd
Rose Original
The Original is the bridge that started it all! The steel saddles,
hardened steel base plate and large spring block provide the sustain
and tone that you expect from this high quality bridge. |
|
|
Floyd
Rose Tremolo Arms
Floyd Rose Tremolo Arms come complete with the tremolo
arm receptacle and screw-mounted collar for easy installation for
all Floyd Rose II, Original and Pro Tremolo Assemblies.
|
|
|
|
Deluxe
Locking Tremolo Assembly
The Deluxe Locking Tremolo is similar in size and feel to an American
Standard Tremolo, except that the strings are locked down at the bridge.
For maximum tuning stability, use with Fender/Schaller Locking Tuners
and the LSR Roller Nut. Mounting hardware and tremolo arm included.
Available in chrome with brushed saddles only. |
|
Floyd
Rose Locking Nut
Designed for the Floyd Rose Locking Tremolo assembly, the Floyd Rose
Locking Nut is a major ingredient in the recipe for tuning stability.
Each nut is designed with a hardened metal base plate for increased
sustain and heavy-duty string locking caps to insure a good string
grip. Use the Pro locking nut with the Floyd Rose Pro Tremolo and
the Floyd Rose II/Original nut for either the Floyd Rose II or Original
tremolo assembly. Please refer to the "Floyd Rose Facts" chart below
to help you determine the right locking nut for your needs. |
|
|
Floyd
Rose Pro
#2 PRO Nut Assembly
Average Vintage Stratocaster width. Width: 1-5/8"; Height: .225";
Spacing: 1.37; Radius: 10".
#4 PRO Nut Assembly
Wide width, wide spacing. Width: 1-11/16"; Height: .275"; Spacing:
1.43; Radius: 10".
#8 PRO Nut Assembly
Same as Nut #4, but flatter radius. Width: 1-11/16"; Height: .225";
Spacing: 1.43; Radius: 15".
Floyd Rose II and Floyd Rose Original
#1 Nut Assembly
Narrow nut. Width: 1-9/16"; Height: .225"; Spacing: 1.30; Radius:
10". 39.7mm/1.30mm/.225mm
#2 Nut Assembly
Average Vintage Stratocaster width. Width: 1-5/8"; Height: .225";
Spacing: 1.37; Radius: 10". 41.3mm / 1.37mm / .225mm
#3 Nut Assembly
Wide nut, narrow spacing for binding. Width: 1-11/16"; Height: .275";
Spacing: 1.40; Radius: 10". 42.9mm / 1.40mm / .275mm
#4 Nut Assembly
Wide width, wide spacing. Width: 1-11/16"; Height: .275"; Spacing:
1.43; Radius: 10". 42.9mm / 1.43mm/ .275mm
#5 Nut Assembly
Extremely wide. Width: 1-3/4"; Height: .275"; Spacing: 1.50; Radius:
10". 44.5mm / 1.50mm / .275mm
#6 Nut Assembly
Same as Nut #1, but with bullet nut relief. Width: 1-9/16"; Height:
.225"; Spacing: 1.30; Radius: 10". 39.7mm / 1.30mm / .225mm
#7 Nut Assembly
Same as Nut #2, but with bullet nut relief. Width: 1-5/8"; Height:
.225"; Spacing: 1.37; Radius: 10". 41.3mm / 1.37mm / .225mm
#8 Nut Assembly
Same as Nut #4, but flatter radius. Width: 1-11/16"; Height: .225";
Spacing: 1.43; Radius: 15". 42.9mm / 1.43mm / .225mm
|
|
